GUIDE FOR BUYING PLUMBING FITTINGS - LCETED

BUYER'S GUIDE FOR PLUMBING FITTINGS

Pipe fittings, also known as pipe connectors, connect one pipe to another pipe to extend the flow or change the direction of flow in a plumbing system. These can be used to combine, divert or reduce water flow, and come in various sizes to fit the connecting pipe.

SELECTION CRITERIA FOR PIPE FITTINGS:

Pipe fittings should be selected with several factors in mind. It is as follows:

Connection types: When buying plumbing fixtures, you should be aware that the installation can have two different types of connector. One end of the fitting might be female threaded while the other male threaded. One end might be male slip while the other end is threaded, in the case of plastic fittings. They can also have matching ends which can accommodate any requirement. 

Materials of construction: As a rule, pipe installation should be similar to the material used to make the pipe. However, in some cases, products that meet certain codes or standards may apply to other material pipes.

Flow Check: To ensure steady flow, the end of the pipe fittings must be slightly larger than the other tubes to accommodate the connection without narrowing the internal diameter (ID) of the pipe.

Fit Types: Except for pipe fitting, pipe fittings are identified by the type of installation - threaded or slip, male or female

Size: When measuring the size of pipe fittings, Male fittings are adjusted to the outer edge or OD, while female fittings are fitted to the inner edge of the gate or ID.

Thickness: The pipe has various thicknesses or pipe fittings, 

Design: Each pipe or tube is designed to carry certain types of fluids, fluids, gases, and chemicals under different conditions. Therefore, pipe fittings are available in a variety of designs.

Standards and codes: There are specific standards and codes set by different companies, which are standardized by different piping equipment.

LCETED TRIVIA

Various materials are used in the making of pipe fittings

Rubber, Plastic, Iron, Steel, Copper, Stainless steel, Aluminium, Cast iron, Ductile iron etc.

Buyer's guide

What should buyers look for bulk purchase of Plumbing fittings?

When making a bulk purchase of accessories, buyers should always consider certain features to ensure maximum reliable performance such as high pressure, boost, vibration, vacuum, and temperature. Some specifications to look for are the following:

·       Should be convenient to transport and handle

·       Must have high strength

·       Resistance must be less

·       Corrosion resistance

·       These should be no pipe furring

·       Sound insulation

·       Easy to install

·       Long lifespan of the elbow

·       Economical

·       Good packaging

·       Healthy and non-toxic, bacterial neutral (where applicable)

·       Resistant to high temperatures

·       Reliable installation

·       Good heat preservation

·       Excellent design ensuring suitability for both exposed and hidden installation etc.

  LCETED INSTITUTE FOR CIVIL ENGINEERS

“Our Mission To Educate And Keep People Informed By Creating A Trusted Source Of Knowledge Everything Related To Civil Engineering”. 

Share