THE STANDARD PROCEDURE FOR PAINTING METAL SURFACE
The surface should be completely free from dirt, dust, grease, rust and moisture.
Cover the area that you don’t want to paint with masking tape, paper and/or cloth.
STEP 2: Sand The Surface
Thoroughly sand the surface with Emery Paper 180, so as to remove loose rusts. Wipe clean
STEP 3: Applying Primer
Apply your chosen metal primer, choose according to your corrosion protection requirement, as per their corresponding application procedure.
Ensure adequate drying time for primers as per their product recommendations.
LCETED TRIVIA
Purpose of primer
The primer, in short, does something very important, so it is Improves paint adhesion, thus improving the durability and durability of the paint filler.
For metal surfaces is up to your budget
STEP 4: Applying 1st Coat Paint
Sand the primer with emery paper No. 400. Wipe clean and ensure that the surface is free of particles.
1) Applying 1st Coat Paint
2) Wall Left 10-12 Hrs To Dry
STEP 5: Applying 2nd Coat Paint
1)Applying 2nd Coat Paint
2)Wall Left 10-12 Hrs To Dry
ALSO READ: Wall Paint Cost and material Calculator
LCETED TRIVIA
Are 2 Coats Of Paint Enough?
You can expect some surfaces to last twice as long with a second coat! Two coats of paint are always better and more professional than the one. The best paints sold by the best paint dealers recommend a two coat system. You get a long warranty with two coats of paint.
“Our Mission To Educate And Keep People Informed By Creating A Trusted Source Of Knowledge Everything Related To Civil Engineering”.
CHECK THIS
No comments:
Post a Comment